Mounting The Main/Sub Heater; Removing The Thermal Switch - Canon iR5000i Service Manual

Hide thumbs Also See for iR5000i:

Table of Contents

CHAPTER 6 FIXING SYSTEM

4.3.2 Mounting the Main/Sub Heater

Mount the fixing heater by reversing the

steps used to remove it while keeping the

following in mind:

a. Do not touch the surface of the heater.

b. Orient both heaters so that the side with

the longer harness is toward the front.

c. Mount the main heater [1] to the right

and the sub heater [2] to the left (view-

ing from the front of the fixing assem-

d. Stagger the heater so that its protrusion

will not interfere.

e. When mounting the faston of the fixing

heater at the rear, be sure that the faston

terminals (A, B) do not face the outside;

rather, they must be parallel with the

1) Remove the fixing assembly form the

2) After detaching the fixing web, remove

the two screws [1], and detach the oil

pan [2] and the fixing harness cover [3].

2000 2000 2000 2000

CANON iR5000i/iR6000i REV.0 JUNE 2001

Table of Contents

Ir6000i Image reader-a1