Table of Contents
Advertisement
No.
Tx/Rx
##0769
[Tx]
At time of ECM transmission, the procedural signal has been transmitted more
than specified after transmission of PPS-EOP, or T5 time-out (60 sec) has
occurred.
##0770
[Tx]
At time of ECM transmission, no meaningful signal is received after
transmission of EOR-NULL, causing the procedural signal to be transmitted
more than specified.
##0772
[Tx]
At time of ECM transmission, DCN is received after transmission of EOR-
NULL..
##0773
[Tx]
At time of ECM transmission, the procedural signal has been transmitted more
than specified after transmission of EOR-NULL, or T5 time-out (60 sec) has
occurred.
##0774
[Tx]
At time of ECM transmission, ERR is received after transmission of EOR-
NULL..
##0775
[Tx]
At time of ECM transmission, no meaningful signal is received after
transmission of EOR-MPS, causing the procedural signal to be transmitted
more than specified.
##0778
[Tx]
At time of ECM transmission, the procedural signal has been transmitted
more than specified after transmission EOR-MPS, or T5 time-out (60 sec) has
occurred.
##0779
[Tx]
At time of ECM transmission, ERR is received after transmission of EOR-
MPS.
3
##0780
[Tx]
At time of ECM transmission, no meaningful signal is received after
transmission of EOR-EOM, causing the procedural signal to be transmitted
more than specified.
##0782
[Tx]
At time of ECM transmission, DCN is received after transmission of EOR-
EOM.
##0783
[Tx]
At time of ECM transmission, the procedural signal has been transmitted more
than specified after transmission of EOR-EOM, or T5 time-out (60 sec) has
occurred.
##0784
[Tx]
At time of ECM transmission, no meaningful signal is received after
transmission of EOR-EOP, causing the procedural signal to be transmitted
more than specified.
##0787
[Tx]
At time of ECM transmission, DCN is received after transmission of EOR-EOP.
##0788
[Tx]
At time of ECM transmission, the procedural signal has been transmitted more
than specified after transmission of EOR-EOP, or T5 time-out (60 sec) has
occurred.
##0789
[Tx]
At time of ECM transmission, ERR is received after transmission of EOR-EOP.
##0790
[Rx]
At time of ECM reception, ERR is transmitted after transmission of EOR-Q.
##0791
[Tx]
While ECM mode procedure is under way, a signal other than a meaningful
signal is received.
##0792
[Rx]
At time of ECM reception, PPS-NULL cannot be detected over partial page
processing.
##0793
[Rx]
At time of ECM reception, no effective frame is received while high-speed
signal reception is under way, thus causing time-out.
##0794
[Tx]
At time of ECM reception, PPR with all 0s is received.
##0795
[Tx/Rx] A fault has occurred in code processing for communication.
3-10
All manuals and user guides at all-guides.com
Description
T-3-4
T-3-4
Jam Code
Main Unit
•
550-sheet 1st cassette model
S40
S42
S12
S19
S7
S5
S1
F-3-1
F-3-1
Advertisement
Table of Contents
