Canon iR5000i Service Manual page 743

CHAPTER 5 SERVICE MODE
<ACC-STS>
Indicates the connection of accessories.
FEEDER
Indicates the connection of the ADF. (0: not connected, 1: connected)
SORTER
Indicates the state (connection) of the finisher and the puncher unit.
DECK
Indicates the connection of the paper deck (accessory). (0: not connected,
1: connected)
CARD
Indicates the connection of the control card. (0: not connected, 1: con-
nected)
DATA-CON
Indicates the connection of a self diagnosis device. (0: none, 1: copy data
controller, 2: remote diagnostic device)
RAM
Indicates the size of the memory mounted to the main controller. (64 MB,
128 MB)
NIB
Indicates the connection of a network board. (0: none, 1: Etherboard, 2: To-
ken-Ring, 3: both)
LIPS-RAM
Indicates the size of the memory mounted on the LIPS board. (xx MB)
LIPS
Indicates the connection of the LIPS board. (0: not connected, 1: con-
nected)
PS/PCL
indicates PS/PCL settings (0: absent; 1: PS/PCL; 2: PS kanji)
RIP1
Indicates the connection of the RIP1 board. (0: not connected, 1: con-
nected)
NETWARE
indicates presence of NetWare firmware (0: absent; 1: present)
5-10 T
Display: xy
x= 0: none, 1: finisher, 2: saddle finisher, 3: shift tray
y= 0: none, 1: 2-hole, 2: 2/3-hole, 3: 4-hole (FRN), 4: 4-hole (SWDN)
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
COPIER>DISPLAY