Canon iR5000i Service Manual page 246

CHAPTER 4 IMAGE FORMATION SYSTEM
3.4.2 Controlling the Output to Suit the Environment (fuzzy control)
The pre-transfer charging current is optimized in relation to the site conditions (i.e., base
on the data from the environment sensor).
COPIER>OPTION>BODY>FUZZY (turning on/off fuzzy control)
0: fuzzy control ON (default)
1: low humidity mode (uses a lower-than-standard pre-transfer charging
2: normal humidity mode
3: high humidity mode (use higher-than-standard pre-transfer charging
Setting it to '1' through '3' will make the control independent of the read-
ing from the environment sensor.
4-24 P
-260
-10
¬
Low humidity
current)
current)
COPYRIGHT © 2001 CANON INC.
®
High humidity
F04-304-02
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001