Receiving A Fax; Receiving A Fax Manually; Receiving A Two-Sided Fax - Lexmark 7500 Series User Manual

13
Press keypad 1 for AM, keypad 2 for PM, or keypad 3 for 24 Hr.
Note: You can also press
14
Press .
Note: At the designated time, the fax numbers are dialed and the fax is sent to all of the designated fax numbers. If
the fax transmission is unsuccessful to any of the numbers on the broadcast list, the unsuccessful numbers will be
dialed again.

Receiving a fax

Receiving a fax manually

1
Make sure the printer is on and is connected to a working phone line.
2
Make sure that Auto Answer is off.
Note: An indicator, resembling a telephone handset with the word FAX under it, is shown in the top left corner
of the display when Auto Answer is on.
To disable auto answer:
a
From the control panel, press
b
Press .
The Fax Mode menu appears.
c
Press or repeatedly until you reach Auto Answer.
d
Press or repeatedly until Off appears.
e
Press to save and exit.
3
To receive the fax, press
or
4
Press * 9 * on the telephone after you answer it and hear fax tones.
5
Hang up the telephone. The printer receives the fax.

Receiving a two-sided fax

The printer has a built-in duplex unit that lets you print received faxes on both sides of the paper.
Note: For two-sided printing, use only plain paper in letter or A4-size.
1
From the control panel, press
The light comes on.
2
From the control panel, press
3
Press .
4
Press or repeatedly until Fax Setup is highlighted.
5
Press .
6
Press or repeatedly until Fax Printing is highlighted.
7
Press .
or repeatedly to scroll through AM, PM, or 24 Hr.
or repeatedly until Fax is highlighted.
.
.
or repeatedly until Fax is highlighted.
119