Tx Power - Nokia NSB-7 Series Service Manual

PAMS Technical Documentation
Tx Power... command
Activation
Alt, T, X
Starts TX power tuning.
Tuning is started automatically with EEPROM values. If values read from EEPROM are not
valid then user is able to start the tuning with factory values. There is a notification
shown if this happens.
Start Tuning dialog has following items:
Start Tuning With list box (ALT+S):
1 EEPROM Values
Tuning values are load from ME's EEPROM.
2 Factory Default Values
Tuning values are load from ME's flash.
3 Current Values in PC memory
Tuning values are load from program's internal memory.
The next automatic selections are made when this tuning function is activated:
• the BASE power level is selected
• Operation mode = TX pulsed
Issue 1 06/00
Status Bar Text
Open TX Power Tuning dialog box
ãNokia Mobile Phones Ltd.
Service Software Instructions
NSB-7
Page 37