Page 1
AudioCodes 430HD IP Phone Quick Guide 1 Before Installing Congratulations on purchasing your AudioCodes 430HD IP Phone! Before you begin using the phone, ensure that the following items are included in the shipped box: Handset 430HD IP Phone ...
Page 2
3 Cabling the Phone Warning: Prior to connecting power, refer to the Compliancy and Regulatory Information at www.audiocodes.com/library. To cable the phone: Connect the short, straight end of the phone cord to the handset and the longer straight end of the cord to the handset jack on the phone.
Page 3
5 Upgrading IP Phone Firmware If you need to upgrade your phone's firmware, refer to the Software Upgrade Configuration Note, downloadable from http://www.audiocodes.com/downloads. 6 Operating the Phone To make a call: Pick up the handset, enter a phone number and then press the Dial softkey. To call a phone contact, press the directory icon softkey, access the Corporate or Personal directory, select the contact and then press the Dial softkey.
Page 4
To end the three-way conference call, hang up the phone or press the End softkey. Notice Information This Quick Guide describes the quick setup for AudioCodes 430HD IP Phone Version 2.0.x. If you have a later version, verify with AudioCodes that the information in this document is compatible with your IP Phone.