Copy And Scan Troubleshooting - Lexmark 101 User Manual

Copy and scan troubleshooting

• "Copier or scanner does not respond" on page 101
•
"Scanner unit does not close" on page 101
• "Poor copy or scanned image quality" on page 101
•
"Partial copies or scans of documents or photos" on page 102
•
"Scan was not successful" on page 102
•
"Scanning takes too long or freezes the computer" on page 103
•
"Cannot scan to a computer over a network" on page 103
Copier or scanner does not respond
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
S
ET YOUR PRINTER AS THE DEFAULT PRINTER
R
EMOVE AND REINSTALL THE PRINTER SOFTWARE
Scanner unit does not close
1
Lift the scanner unit.
2
Remove any obstruction keeping the scanner unit open.
3
Lower the scanner unit.
Poor copy or scanned image quality
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
C
LEAN THE SCANNER GLASS
A
DJUST THE SCAN QUALITY FROM THE PRINTER SOFTWARE
R
EVIEW THE TIPS FOR COPYING
U
SE A CLEARER VERSION OF THE ORIGINAL DOCUMENT OR IMAGE
M
AKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN THE CORRECT
CORNER
, ,
SCANNING AND IMPROVING PRINT QUALITY
Troubleshooting
101