Setting The Bluetooth Security Level - Lexmark 101 User Manual

To set up a connection between the printer and a Bluetooth-enabled device:
1
Insert a USB Bluetooth adapter into the USB port located on the front of the printer.
Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2
From the printer control panel, press
3
Press the arrow buttons to scroll to Bluetooth Setup, and then press
4
Press the arrow buttons to scroll to Discovery, and then press
5
Make sure Discovery is set to On. If necessary, press the arrow buttons to scroll to On, and then press
The printer is now ready to accept a connection from a Bluetooth-enabled device.
6
Configure the Bluetooth-enabled device to set up a connection to the printer. For more information, see the
documentation for your Bluetooth device.
Note: If the Bluetooth Security Level on the printer is set to High, then you must enter a pass key.

Setting the Bluetooth security level

1
Insert a Bluetooth USB adapter into the USB port.
Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
o th R
e to
B lu
.
o th R
e to
B lu
Printing
45
.
.
.