Lexmark 101 User Manual page 46

2
From the printer control panel, press
3
Press the arrow buttons to scroll to Bluetooth Setup, and then press button
4
Press the arrow buttons to scroll to Security Level, and then press
5
Press the arrow buttons to select the security level, and then press
• Select Low to allow Bluetooth devices to connect and send print jobs to your printer without requiring users to
enter a pass key.
•
Select High to require users to enter a four-digit numeric pass key on the Bluetooth device before connecting
and sending print jobs to the printer.
6
The Bluetooth Pass Key menu appears on the display if you set the security level to High. Press the arrow buttons
to enter the four-digit pass key. Press
Printing from a Bluetooth-enabled device
Note: The printer does not support printing files from your computer using a Bluetooth connection.
1
Insert a USB Bluetooth adapter into the USB port.
Bluetooth Dongle Connected appears on the display.
Warning—Potential Damage: Do not touch cables, any network adapter, any connector, the USB Bluetooth
adapter, or the printer in the areas shown while actively printing, reading, or writing from a Bluetooth-enabled
device. A loss of data can occur.
Notes:
•
A Bluetooth adapter is not included with the printer.
• Your printer automatically switches to Bluetooth mode when you insert a USB Bluetooth adapter.
2
Make sure the printer is set up to receive Bluetooth connections. For more information, see "Setting up a connection
between your printer and a Bluetooth-enabled device" on page 44.
3
Set up the Bluetooth device to print to the printer. For more information, see the documentation for your Bluetooth
device.
4
See the documentation for your Bluetooth device to begin printing.
Note: If the Bluetooth Security Level on the printer is set to High, you must enter a pass key.
.
each time you enter a number.
o th R
e to
B lu
Printing
46
.
.
.