Safely Disconnect The Scanner From Pc; Scan To Pc Manager; System Requirements; Installing Scan To Pc Manager - Pandigital PhotoLink PANSCN04 User Manual

Safely Disconnect the Scanner from PC

1. On the Windows System Tray, click the hardware removal icon as indicated below.
2. Click the 'Safely remove USB mass Storage device' message with the corresponding Drive.
3. When the 'Safe to Remove Hardware' message appears, you can safely remove the scanner's USB cable.
S c a n T o P C M a n a g e r
With the Scan To PC Manager, you can easily scan photos and save the scanned images directly to the connected PC. You can
also choose the location where the scanned images will be saved.

System Requirements

Operating system: Windows XP, Vista, Windows 7 - 32 bit or later - 10MB free hard disk space
(The Scan To PC Manager is not supported on the Macintosh operating systems.)

Installing Scan To PC Manager

1. Connect the scanner to your PC using the Pandigital SD card (included with scanner).
2. In a Windows Explorer window, locate the PDSCAN drive, and then double-click the
ScanToPC_xxxx folders.
3. In the right pane, double-click
4. Follow the on-screen instructions to complete the installation.
Once installed, the
If you want to close the
select Exit.
Important - the

Using the Scan To PC Manager

When the scanner is connected via USB cable to the PC, the indicator light will be blinking. The
will appear, similar to this example:
10
Hardware Removal Icon
Setup.exe

Scan To PC Manager

Scan To PC Manager
Exit
option will not be available for Windows XP users.
to begin the installation.
runs automatically upon PC startup, and the
temporarily, right-click on the icon and
Pandigital
, Utility, and
icon stays on the system tray.
Scan To PC Manager
window