Introduction; Scanner/Converter Overview - Pandigital PANSCN06 User Manual

I n t r o d u c t i o n
Now you can scan your printed photos and store them directly onto your memory card. No computer is necessary. Simply insert a
memory card into the Personal Photo Scanner/Converter (Scanner/Converter), and power it on. When the unit is ready, feed your
printed photo into the Scanner/Converter and your pictures will be stored in the memory card. It's as easy as that.
If you want to store your photos directly into your PC, it's just as easy via a USB cable and our Scan2PC/Mac software (page 12).
S c a n n e r / C o n v e r t e r O v e r v i e w
Front View
No. Name
Power Button
Power Indicator
Status/Card Indicator
Paper Guide Slide
Feeding Slot
Mini USB port
Power socket
Rear View
No. Name
Output slot
SD/xD/MMC/
MS card slot
6
Function/ Description
Press to power on the Scanner/Converter.
When Scanner/Converter power is on, press to change scanning resolution.
Press and hold for 1 second to power off the Scanner/Converter.
If an original gets stuck in the feeding slot
Scanner/Converter.
Indicates the power status of the Scanner/Converter. (Refer to "Indicator Lights" on page 7.)
Indicates the operating status of the Scanner/Converter and memory card. (Refer to
"Indicator Lights" on page 7.)
Slide the guide to adjust for smaller originals to ensure the proper alignment.
Insert an original photo into this slot to begin scanning.
For connecting to a computer via a USB cable.
For connecting to the supplied power adapter.
Function/ Description
The scanned original comes out from this slot.
Accepts the following types of memory cards: SD, xD, MMC and MS. (Refer to "Supported
Memory Cards" on page 8.)
, press to back it out from the