Scan2Mac Manager (Macintosh); System Requirements; Installing The Scan2Mac Manager; Using The Scan2Mac Manager - Pandigital PANSCN06 User Manual

S c a n 2 M a c M a n a g e r ( M a c i n t o s h )
With the Scan2Mac Manager, you can easily scan photos and save the scanned images directly to the connected computer. You
can also choose the location where the scanned images will be saved.

System Requirements

Operating system:
Mac OS 10.5, 10.6 or later version
10MB free hard disk space

Installing the Scan2Mac Manager

1. Connect the Scanner/Converter to your computer (see instructions beginning on page 11), using the
(included with Scanner/Converter).
2. Open a Finder window.
3. Select PDSCAN volume > Pandigital > Utilities > Scan2Mac.
4. Double-click the Scan2Mac_Setup_Vxxxx.zip file.
5. Double-click Scan2Mac to begin the installation.
6. Follow the on-screen instructions to complete the installation.
7. Click Restart to restart your computer.
8. The Scan2Mac program will automatically start when the restart is complete.
Once installed, the

Using the Scan2Mac Manager

1. When the Scanner/Converter is connected via USB cable to the computer,
the Status/Card light will be blinking. The
will appear.
2. You can specify the location where you want the scanned images to be
saved, either on the memory card or in a specific folder on the computer.
After your first scan, a folder titled PHOTO1 is added to the file structure.
Therefore, if Scan2Mac is selected, the scanned images will be saved to
the following location by default:
/Users/(your username)/Pictures/PHOTO1/
You can also click the
prefer.
Apply
3. Click ; the window will close.
4. Scan your original as instructed beginning on page 9.
5. The scanned image will be saved to the location you selected in step 2
above.

File Naming Convention

Each scanned image is given a file name with the prefix
images are stored. For example,
If the file name reaches
store subsequent new files, and so on.
There can be up to 9 folders (
indicator light blinks. Delete some files on the memory card or use another one if necessary.

Manually Start the Scan2Mac Manager

1. Open a Finder window.
2. Click Applications, and then double-click

Uninstalling the Scan2Mac Manager

1. Close the Scan2Mac Manager by clicking the
2. Click Yes to confirm you want to exit the application.
3. Open a Finder window.
4. Click Applications, right-click Scan2Mac, and then select Move to Trash.
14
Scan2Mac Manager
opens whenever you connect the Scanner/Converter.
Scan2Mac Manager
button to select a different location if you
PD_0001.JPG
,
PD_9999.JPG PHOTO1
in the
PHOTO1..9 PD_0001... PD_9999
,
window
PD_
followed by a 4- digit sequential number in the order the
PD_0002.JPG
.
folder, a new folder titled
) on a memory card. If exceeded, the Status/Card
Scan2Mac .
icon in the top Finder bar, and then click Exit.
Pandigital SD card
PHOTO2
will automatically be created to