Nikon Coolpix 8700 Repair Manual page 78

Item
LCD and others
Monitor LCD View
Visual field ratio
Bright pixels or
dim pixels on
LCD
Self-timer
Operation time:
10 seconds
3 seconds
LED blinks/lights
Electric characteristics
Consumption current
Stand-by
Start (Photography)
B. C voltage
Level 1
Level 2
Level 3
• There must be no shading in the LCD display range.
• Inclination between the monitor and the monitor frame must
not be outstanding.
• Through-the-monitor image: 96 to 100%
• Play-back image:
B
A
1/2H
H
Zone Bright pixel
A
B
Total
Bright pixels: Visible normally through 5% ND filter
Dim pixels: Visible normally (Standard: Within the above
quantity)
• 10 ± 3 seconds
• 3 ± 1 seconds
• Blinks for 9 seconds and lights for 1 second.
• Blinks for 2 seconds and lights for 1 second.
(Measure the time until release is done since S2 was ON.)
• 0.25mA or less (when the power switch is OFF)
• 0.35mA or less (at "Sleep")
(Connect 6V from the constant-voltage power supply and
perform measurement.)
• 1A or less (when the custom "0" start monitor is ON)
• 4.55 ± 0.2V (for battery), 7.13 ± 0.2V (for secondary battery)
6.1 ± 0.2V (external battery)
• 4.0 ± 0.2V (for battery), 6.7 ± 0.2V (for secondary battery)
5.6 ± 0.2V (external battery)
• 3.5 ± 0.2V (for battery), 5.5± 0.2V (for secondary battery)
4.2 ± 0.2V (external battery)
- R5 ･ E8700 -
Criteria
98 to 100%
V
1/2V
Dim pixel
1 6
3 6
3 6
VAA26001-R.3627.A
Applied tool(s)
Visual observation
Visual observation
Visual observation
Visual observation
Stop watch
Constant voltage
power supply
Ammeter
Constant voltage
power supply
Volt meter