CP-1 PCB, CA-1 PCB, PW-1 PCB
⑩
⑱
• Remove the screw ① (M1.7x2.5).
• Remove the connector ② ,the connector ③ ,and then remove the PW-1 PCB ④ .
• Remove the screw ⑤ (M1.7x2.5),and then remove the USB holder ⑥ .
• Remove the FPC ⑦ and the connector ⑧ .
• Remove the FPC ⑨ .
• Remove the screw ⑩ (M1.7x3).
• Remove the 2 Pieces of connector ⑪ , and then remove the CP-1 PCB ⑫ .
• Remove the 2 Pieces of spacers ⑬ .
• Remove the FPC ⑭ , and then remove the holder unit ⑮ .
• Remove the screw ⑯ (M1.7x4).
• Remove the SB unit ⑰ from the condenser holder ⑱ .
• Remove the FPC ⑲ .
• Remove the TB-2 PCB ⑳ .
⑭
⑮
⑰
A
⑪
⑯
- D7 ・ E8700 -
⑫
A
⑬
②
⑨
⑦
VAA26001-R.3627.A
⑲
⑳
④
③
⑤
⑥
⑪
⑧
①