Nikon Coolpix 8700 Repair Manual page 20

Zoom motor unit / Zoom gear
● This part can be disassembled without the lens-barrel.
#670
Lens-barrel FPC
① Take out the screw (#683) to remove the washer (#652).
② Remove the copper tape (#663).
③ Take out 2 screws (#681) to detach the zoom motor unit (B8).
④ Remove the gears (#632 - #635, #639).
※ Perform the following ⑤ , ⑥ ,and ⑦ , when the zoom motor
unit (B8) or zoom PI need to be replaced.
⑤ Remove the adhesive tape (#670).
⑥ Remove the solder between the zoom motor terminal area and
lens-barrel FPC.
⑦ Remove the zoom PI of the lens-barrel FPC unit (#961FA) from the
zoom motor unit (B8).
Note : Remove the zoom PI carefully because it is a pressed fitting
#683
with the adhesive.
#652
B8
#635
#639
#634
#632
#633
#663
Soldering part
- D15 ･ E8700 -
Zoom PI
#681×2
#670
#961FA
#663
VAA26001-R.3627.A
Zoom PI
Attach with C-8008B