Nikon Coolpix 8700 Repair Manual page 38

TB1 PCB
• Attach the screw (M1.7 × 2.5) to the TB1 PCB. (Fig. 1)
• Attach the three screws
• Mount the cover joint
• Mount the cover joint base
• Attach the screw (M1.7 × 3).
• Attach the two screws
VF1 PCB
• Mount the VF1 PCB, the spacer LCD monitor
the position.
LCD UNIT
• Mount the LCD on the holder LCD monitor (10) and then mount it on the cover front LCD
• Mount the FPC
• Mount the holder LCD side
• Connect the connector
• Mount the cover back LCD
⑮
⑮
（Fig.2）
⑧
(M1.7 × 3).
and attach the screw (M1.4 × 5) and the screw
.
(M1.7 × 4).
and the holder LCD monitor
.
and attach the three screws
.
and attach the four screws
⑩
⑬
⑫
⑮
- A18 ･ E8700 -
(M1.7 × 2.5).
(M1.7 × 2.5). (Fig. 2)
(M1.7 × 3).
⑱
VF1 PCB
⑭
⑨
⑯
LCD
①
TB1 PCB
⑤
②
VAA26001-R.3627.A
and then perform soldering at
.
⑰
⑪
⑥
④
⑦
②
③
TB1 PCB
（Fig.1）
⑱
①