LENS UNIT
⑩
⑨
• Attach the CA-1 holder ③ to the lens unit.
• Attach the 2 pieces of screws ④ (M1.7 x 2.5).
• Assemble the spacer, optical filter and spacer into the lens unit.
• Attach the CA-1 PCB ① to the lens unit.
• Attach the 2 pieces of screws ② (M1.7 x 6).
• Assemble the speaker holder B ⑤ , the speaker ⑥ and the speaker holder A ⑦ .
• Attach the screw ⑧ (M1.7 x 3).
• Pass the connector and FPC of EVF unit through the hole A of the lens unit.
• Attach the EVF ⑨ .
• Attach the 2 pieces of screws ⑩ (M1.7 x 3).
Spacer
Optical
filter
Spacer
A
Lens side
CCD side
- A12 ・ E8700 -
④
①
⑤
②
⑥
③
Optical
CCD side
filter side
VAA26001-R.3627.A
⑧
⑦