Nikon Coolpix 8700 Repair Manual page 23

Shutter unit
Attach with C-8008B
#656
#662
Straight guide tube 2
Positioning pin
#606
A part
#655
#682×2
B3
① Pass the shutter FPC through between the retaining plate (#656)
and the 3rd lens group unit (B3). (In case the retaining plate
#661
(#656) comes off, apply the adhesive on the contact surface to
attach.)
② Attach the shutter unit (#661) with 2 screws (#682).
③ Attach the light-shield sheet (#662).
B part
① Apply the grease (MZ-800S) on the sliding part of the
② Pull the head of shutter FPC through "A part" window of
③ Align the positioning pin of the straight guide tube 2 (#606)
Grease: MZ-800S
- A3 ･ E8700 -
straight guide tube 2 (#606), and assemble it at the
position shown.
the straight guide tube 2 (#606), then pass it through "B
part" window to the inside.
with the hole of FPC, and attach them with the FPC
holding plate (#655).
VAA26001-R.3627.A
#655