Nikon Coolpix 8700 Repair Manual page 28

Fix-tube
Grease: MZ-800S
Front lens-barrel unit
Front lens-barrel unit
#681×4
Protrusion
B15
Protrusion-
side
#636
① Apply the grease (MZ-800S) to the vertical groove of
② Turn the cam tube unit (B15) to the full up position in
③ Attach the coupling gear (#636).
#603
④ Turn the cam tube (#603) to the full up position in the
⑤ Attach the front lens-barrel unit with 4 screws (#681).
- A8 ･ E8700 -
① Turn the cam tube (#603) to the full up position in
the direction indicated by the arrow.
② Apply the grease (MZ-800S) to the sliding part
inside the fix-tube (#602), and assemble them at
the left position.
Check for turn smoothly.
#603
#602
the cam tube unit (B15).
the direction indicated by the arrow.
(Face the protrusion-side to the rear lens-barrel unit)
direction indicated by the arrow.
VAA26001-R.3627.A
Grease: MZ-800S