Nikon Coolpix 8700 Repair Manual page 26

1st and 2nd lens group units
1st lens group unit
Straight guide tube 1
2nd lens group unit
Inside-diameter sliding parts
1st lens group unit
#604
Grease: MZ-800S
#621×3
#622×3
Attach with EDB0011
- A6 ･ E8700 -
・ Apply the grease (MZ-800S) to the
sliding parts of the 1st and 2nd lens
group units, then assemble them at
the left position.
Grease: MZ-800S
① Apply the grease (MZ-800S) to the sliding
parts of the straight guide tube 1 (#604)
and the 1st lens group unit, then assemble
them at the above position.
② Press the guide pins (3 each for #621 and
#622) into place, and attach the pin point
from the inside of the lens unit with the
adhesive.
VAA26001-R.3627.A