Forwarding & Filtering; Unicast Forwarding; Static Multicast Forwarding - D-Link xStack DES-6500 User Manual

Forwarding & Filtering

Unicast Forwarding

Open the Forwarding & Filtering folder in the Configuration menu and click on the Unicast Forwarding link. This will
open the Setup Static Unicast Forwarding Table, as shown below:
Figure 6- 27. Setup Static Unicast Forwarding Table and Static Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add:
Parameter
VLAN ID (VID)
MAC Address
Unit
Port
Click Apply to implement the changes made. Current entries can be found in the Static Unicast Forwarding Table as
shown in the bottom half of the figure above. To delete an entry in the Static Unicast Forwarding Table, click the
corresponding under the Delete heading.

Static Multicast Forwarding

The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the Forwarding &
Filtering folder in the Configuration menu, and click on the Multicast Forwarding link to see the entry screen below:
Figure 6- 28. Static Multicast Forwarding Settings and Current Multicast Forwarding Entries window
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Description
The VLAN ID number of the VLAN on which the above Unicast MAC address
resides.
The MAC address to which packets will be statically forwarded. This must be a
unicast MAC address.
Choose the Switch ID number of the Switch in the switch stack to be modified.
Allows the selection of the port number on which the MAC address entered above
resides.
55