Pae System Control; Port Capability - D-Link xStack DES-6500 User Manual

PAE System Control

Existing 802.1x port and MAC settings are displayed and can be configured using the windows below.

Port Capability

Click Port Access Entity > PAE System Control > 802.1x Capability Settings to view the following window:
To set up the Switch's 802.1x port-based authentication, select the switch in the switch stack by using the Unit pull-down
menu and then select which ports are to be configured in the From and To fields. Next, enable the ports by selecting
Authenticator from the drop-down menu under Capability. Click Apply allow changes to take effect.
Configure the following 802.1x capability settings:
Parameter
Unit
From and To
Capability
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 6- 99. 802.1x Capability Settings and Table window
Description
Choose the Switch ID number of the line card in the switch stack to be modified.
Ports being configured for 802.1x settings.
Two role choices can be selected:
Authenticator - A user must pass the authentication process to gain access to the
network.
None - The port will not be controlled by the 802.1x functions.
123