Paper Is Not Ejected Fully Or Is Wrinkled; The Product Does Not Print; All Lights Are Off; Only The Power Light Is On - Epson l550 User Manual

User's Guide

Paper is not ejected fully or is wrinkled

❏ If the paper does not eject fully, press one of the x buttons to eject the paper. If the paper is jammed inside the
product, remove it by referring to the following section.
"Paper Jams" on page 103
&
❏ If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack of paper.
Note:
Store any unused paper in its original packaging in a dry area.

The Product Does Not Print

All lights are off

❏ Press the P button to make sure the product is on.
❏ Make sure that the power cord is securely plugged in.
❏ Make sure that your outlet works and is not controlled by a wall switch or timer.

Only the power light is on

❏ Turn off the product and computer. Make sure the product's interface cable is securely plugged in.
❏ If you are using the USB interface, make sure your cable meets the USB or Hi-Speed USB standards.
❏ If you are connecting the product to your computer via a USB hub, connect the product to the first-tier hub from
your computer. If the printer driver is still not recognized on your computer, try to directly connect the product to
your computer without the USB hub.
❏ If you are connecting the product to your computer via a USB hub, make sure the USB hub device is recognized by
your computer.
❏ If you are trying to print a large image, your computer may not have enough memory. Try reducing the resolution
of your image or printing the image at a smaller size. You may need to install more memory in your computer.
❏ Users of Windows can clear any stalled print jobs from the Windows Spooler.
"Canceling printing" on page 32
&
❏ Uninstall the printer driver, then reinstall it.
"Uninstalling Your Software" on page 96
&
Troubleshooting for Printing/Copying
114