Scanner Glass - Epson l550 User Manual

User's Guide
F
Check that the ADF light in the control panel is on.
Note:
❏ The ADF light may stay off if there is any other original on the scanner glass. If you press x in this case, the
original on the scanner glass will be copied, scanned, or faxed instead of the originals in the ADF.
❏ The ADF light will not turn on when the product is in sleep mode. Press any button other than P to recover from
sleep mode. It may take some time for the light to turn on after recovery from sleep mode.
❏ Be careful not to let any foreign object get inside the hole on the left front corner of the scanner glass. Doing so
may prevent the ADF from operating.
❏ When you use the copy function with the Automatic Document Feeder (ADF), the print settings are fixed at
Reduce/Enlarge - Actual Size, Paper Type - Plain Paper, and Paper Size - A4/Legal. The print is cropped if you
copy an original larger than A4/Legal.

Scanner glass

A
Open the document cover and place your original face-down on the scanner glass.
B
Slide the original to the corner.
Note:
See the following sections if any problems occur with the scanning area or the scanning direction when using EPSON
Scan.
"The edges of your original are not scanned" on page 121
&
"Multiple documents are scanned into a single file" on page 122
&
Paper and Media Handling
24