Command History List Commands - D-Link DGS-3100 Series Cli Manual

The Command History List commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
?
show
command_history
dir
config
command_history
Each command is listed in detail, as follows:
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the commands in the CLI:
DGS3100# ?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
C
OMMAND
Parameter
<value 10-237>
To display all commands in the Command Line Interface (CLI).
?
The ? command displays all of the commands available through the
Command Line Interface (CLI).
{<command>} – Lists all the corresponding parameters for the
specified command, along with a brief description of the command's
function and similar commands having the same words in the
command.
None.
H
ISTORY
127
23
L C
IST OMMANDS