Connecting The Mywirelesstv Receiver - ActionTec MyWirelessTV MWTV200T User Manual

7. Plug the other end of this HDMI cable to an HDMI port on the source
device. is cable should now connect the Transmitter to the source
device.
8. Turn on the HDTV and make sure you can see video from your source
device.

Connecting the MyWirelessTV Receiver

e Receiver must be installed near the HDTV monitor where you intend
to watch the content being streamed from the source device.
1. Get the second power supply from the MyWirelessTV kit and plug the
smaller end into the 5VDC (Power) port on the back of the Receiver.
2. Plug the other end into an electrical wall socket.
glow solid green.
3. Get the second HDMI cable from the MyWirelessTV kit and plug one
end into an HDMI port on the HDTV monitor.
4. Plug the other end of this HDMI cable into the HDMI Out to TV port
on the back of the Receiver.
Receiver to the HDTV monitor.
5. Turn on the HDTV monitor. You should be able to see content being
streamed from the source device.
MyWirelessTV User Manual
is cable should now connect the
12
e Power LED will