Fb Edge Erase; Scanner Manual Registration; Disable Scanner; Paper Prompts - Lexmark 6500e Service Manual

4036-310, -311

FB Edge Erase

The FB Edge Erase setting specifies, in millimeters, the size of a border around the scanned image that will be
erased. For copies, the printed page will always have a at least a 2-mm no-print border. The larger of the 2-mm
no-print border and the Edge Erase setting will be used in this situation.

Scanner Manual Registration

Use this menu to adjust the scanner margins after you replace any of the following parts:
—
Flatbed scanner assembly
—
Front ADF scanner assembly
—
Back ADF scanner assembly
Note: The Scanner Manual Registration menu does not appear if Disable Scanner is set to Auto Disabled.

Disable Scanner

Use this setting to enable or disable the flatbed scanner and ADF.
Note: Auto Disabled can only be saved by the printer in response to failed scanner operation. Users cannot
save this setting.

Paper Prompts

Setting Paper Prompts controls which tray a change prompt is directed to when paper is sensed to be the wrong
size.

Envelope Prompts

Env Prompts controls which tray a change prompt is directed to when the envelopes are sensed to be the wrong
size.

Action for Prompts

This setting enables users to have the printer resolve media change prompt situations automatically. Such
prompts occur when the selected media for the job is not available when the job prints. This setting applies only
to jobs that cannot be parked.
•
Prompt user (default setting)–The user must respond to the prompt and choose one of the following
options each time.
•
Continue–The job prints on the closest available media, and the printer preserves the requested size and
type specifications (e.g., Bond or Transparency). If the available media is smaller than the requested size,
the printer crops the print image as needed.
•
Use Current–The job prints on the media currently available and uses the size and type specifications of
the available media instead of the original job. If the media is smaller than the requested size, the printer
crops the print image as needed.

Jobs On Disk

This setting appears only if a hard disk is installed. Jobs can be deleted from the hard disk. Settings are Delete
and Do Not Delete (default). The Delete setting does not affect Print and Hold or parked jobs.
3-12
Service Manual
Previous
Next
Go Back