Print Counter Display; Factory/Shipping Mode Setting - Oki MC361 Service & Troubleshooting Manual

Upper Display Lower Display
K OVER RIDE ********TIMES
CNT
Y OVER RIDE ********TIMES
CNT
M OVER RIDE ********TIMES
CNT
C OVER RIDE ********TIMES
CNT

2.8.7 Print counter display

The print counter display is used for viewing print counter values.
1. Enter the self-diagnostic mode and, until PRINTER STATUS appears, press [2]
or [8] ([2] displays the next test option and [8] displays the preceding test option).
Then press the [6] button.
2. Press [2] or [8], and each count is printed (the [*] or [#] button is disabled).
3. Press [4] to end the option (the state for step 1 is restored).
Upper Display Lower Display
K – ********IMAGES
IMPRESSIONS
Y – ********IMAGES
IMPRESSIONS
M – ********IMAGES
IMPRESSIONS
C – ********IMAGES
IMPRESSIONS
TOTAL SHEET ********COUNTS
CNT

2.8.8 Factory/Shipping Mode Setting

The Factory/Shipping mode setting is used for switching from the Factory to Shipping
mode.
1. Enter the self-diagnostic mode and, until the following message appears, press
or [8].
2. Press or
[2] [8]
to set (refer to the table shown below) appears.
3. By pressing the
can be selected.
Format
Decimal
Decimal
Decimal
Decimal
Format
Decimal
Decimal
Decimal
Decimal
Decimal
and the following message appears. Press
button with the option on the display, a setting for the option
[6]
Unit Detail
Times Each displays the extension life
count of a toner cartridge.
Times
Times
Times
Unit Detail
Images Number of printed sheets for
each color is displayed.
Images
Images
Images
Prints Total number of printed sheets
is displayed.
or
[2] [8]
[2]
until an option
36