Engine Diagnostic Mode (Self-Diagnostic) - Oki MC361 Service & Troubleshooting Manual

T.30 Monitor
The unit keeps the last transmission log (Tx/Rx commands) on volatile memory, and
print when select "Execute".
If turn off the unit, the records will be lost.
Personality
IBM 5577
IBM PPR III XL
EPSON FX
Engine Diag Mode
See Section 2.7

2.8 Engine Diagnostic Mode (Self-Diagnostic)

How to enter self-diagnostic mode
Note! The initial Password is set to "000000" (Six zeros).
1. When the equipment is in standby mode, access the password entry screen by
pressing [Setting] # 0 1 0 3 *
2. Press the Down Arrow until Printer Maintenance is highlighted and press OK
3. Arrow down to Engine Diag Mode and press OK
Press either
[2] key
(Menu item scrolls when either
Press the
[6] key
Values: Enable / Disable
Values: Enable / Disable
Values: Enable / Disable
or to move to the respective self-diagnostic items.
[8] key
[2] key
to execute the selected test. Exit the test by pressing the
Default: Enable
Default: Enable
or is pressed.)
[8] key
00.06.08 = PU Firmware
Version
S-Mode = Shipping Mode
[4] key.
19