Avaya 4600 Series Administrator's Manual page 67

1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Hold 8 4 3 9 # (Hold V I E W #)
Press the Hold key momentarily. Do not press this key while pressing other keys.
The following text is displayed left-justified at the top of the display:
View settings
*=next
2. Press the * button at any time during viewing to display the next name and system value pair
from the list below, returning to the first pair after the last pair has been displayed.
Press the # button at any time during viewing to terminate the procedure and restore the user
interface to its previous state.
The names and values are displayed in the following order:
Table 5-2. Parameter Values
Name
Model
Market
Phone SN
PWB SN
PWB comcode
MAC address
#=exit
System Value
46ccDccc
domestic
export
cccccccccccc
cccccccc
cccccccccccc
cccccccc
ccccccccc
00:60:1D:hh:hh:hh
filename1.exe
filename2.exe
Format
up to 8 ASCII graphics characters
Only one value is displayed
Phone Serial Number, up to 18 ASCII graphic
characters
Printed Wiring Board (circuit board) Serial Number,
up to 18 ASCII graphic characters
9 ASCII numbered characters
Each octet of the MAC address is displayed as a
pair of hexadecimal numbers.
up to 16 ASCII graphic characters.
Out of the box, there will be only one
filename.exe. After installation, there should be
two filenames. If there is only one, installation has
failed. Verify the problem, and then re-install the
telephone.
Troubleshooting Guidelines
The View Administrative Option
5-7