Camera Setup Menu; General Setup Menu - Sony Ipela PCS-XG80S Operating Instructions Manual

Camera Setup Menu

Camera
Camera
Fade In
Allows you to select whether to use the fade-
in function when the camera moves to the
preset position. The picture in the preset
position fades in on a monitor screen.
On: Enables the fade-in function.
Off: Disables the fade-in function.
Second Camera Input
Allows you to select the input connector on
the Communication System to which the
second camera is connected.
RGB: Connects the second camera to the
RGB IN connector.
YPbPr: Connects the second camera to the
VIDEO IN YPbPr jacks.
S-VIDEO: Connects the second camera to
the S VIDEO IN connector.

General Setup Menu

General1
Device Setup
Terminal Name
Input the local terminal name transmitted to
a remote party (up to 30 characters).
Standby Mode
Allows you to select whether the
Communication System enters standby
mode if it is idle for a specified period of
time.
On: Allows the System to go on standby.
Off: Does not allow the System to go on
standby.
Standby Time
Specify the time the system must remain idle
before entering the standby mode. This time
can be set between 1 and 99 minutes.
For details on the standby mode, see
"Standby Mode Function" on page 41.
Last Number Registration
Allows you to select whether to register the
remote party in the Phone Book after the
communication ends.
Off: The registration of the remote party
does not take place.
On: If the remote party is not registered in
the Phone Book, the message "Register
this participant in the list?" appears on
the monitor screen when communication
ends. When you select "OK", the List
Edit menu opens.
Control by Far End
When "Far End Camera Control" is set to
"On" in the Communication setup menu,
you can temporarily reject the camera
control command transmitted by the remote
party.
On: Accepts the camera control command.
Off: Rejects the camera control command.
Language
Allows you to select the menu and display
language used by the system. You can select
from the following languages: English,
French, German, Japanese, Spanish, Italian,
Simplified Chinese, Portuguese, Traditional
Chinese, Korean, Dutch, Danish, Swedish,
Finnish, Polish, Russian, Arabic, Thai,
Norwegian, Turkish, Welsh, Czech and
Hungarian.
System LED Brightness
Allows you to select the LED brightness
level of the Communication System.
You can select from among "Bright", "Off"
and "Dark".
Camera LED Brightness
Allows you to select the LED brightness
level of the PCSA-CXG80 HD Camera Unit
connected.
You can select from among "Bright", "Off"
and "Dark".
RF Remote Control Reception
Allows you to select the receiver of the RF
signal from the supplied PCS-RF1 Remote
Commander.
System: Receives the RF signal with the
receiver on the Communication System.
Registering Local Information
81