Sony Ipela PCS-XG80S Operating Instructions Manual page 61

2
Use the V, v, B or b button to select "Setup", then press the ENTER button
on the Remote Commander.
The Setup menu appears on the monitor screen.
Menus available from a setup menu
The Setup menus are grouped into the following depending on the setting
items. The setup menus that include many setting items are divided into
multiple pages. Select an appropriate menu button to set the respective
item.
The commonly-used menu butttons are displayed on the screen at the
factory. Pressing the F4 button on the Remote Commander allows you to
display the maximum number of setup menu buttons. To restore the
commonly-used setup display, press the F4 button again.
Menu buttons
Line I/F
Setup
Line I/F
Home
Dial
Answer
Back to Tools
Multipoint
Audio1
Video2
LAN
LAN
LAN
SIP
For a description of each setup menu, see the page for that menu indicated
below.
Line Interface setup menu (see page 64)
Dial setup menu (see page 64)
Answer setup menu (see page 65)
Multipoint setup menu (see page 65)
Communication setup menu (see page 66)
Audio setup menu (see page 69)
Video setup menu (see page 72)
LAN setup menu (see page 74)
QoS setup menu (see page 76)
TOS setup menu (see page 77)
SIP setup menu (see page 78)
ISDN setup menu (see page 79)
Annotation setup menu (see page 80)
Camera setup menu (see page 81)
General setup menu (see page 81)
Home Menu setup menu (see page 83)
Administrator setup menu (see page 85)
Encryption setup menu (see page 89)
Shared Phone Book setup menu (see page 90)
Line Interface
IP I SD N SI P
Primary Line Interface
IP I SD N S I P
Use LAN2 Off
Registering Local Information
61