Troubleshooting - Sony Ipela PCS-XG80S Operating Instructions Manual

Troubleshooting

If the Communication System does not function correctly, check the following.
Symptom Cause
The power is not The power switch is not set to on.
turned on.
The batteries in the Remote
Commander are low or dead.
The Remote It is isolated from the
Commander does communication system.
not operate.
Pairing with the Remote
Commander fails.
No sound or the The volume of the system is too
volume is very low. low.
The volume of the TV monitor is
too low.
The microphone on the remote
party is turned off.
Audio input is not selected
properly.
The microphone or external
equipment is not connected
correctly.
Picture is blurred. Manual focus is selected but picture
remains blurred.
When auto focus is selected, the
background is too bright, contrast is
too high, or the background or the
participants' clothes contain fine
line patterns.
Solution
Press the power switch to turn on the
power of the system (page 40).
Replace the batteries with new ones
(page 36).
Perform pairing of the Remote
Commander with the Camera (page
37).
Perform pairing of the Remote
Commander with the System or
Camera Unit (page 37).
Adjust the sound volume by pressing
the VOLUME +/– buttons on the
Remote Commander (page 43).
Adjust the volume of the TV monitor.
Ask the remote party to turn on the
microphone.
• Set up "Input Select (MIC)" on the
Basic Setup1 page of the Audio
setup menu properly (page 70).
• Set up "Audio Input" properly on
the Basic Setup1 page of the Audio
setup menu (page 70).
Check the connection (pages 164, 167
and 172).
Adjust the focus (page 140).
Select manual focus and adjust
manually (page 140).
Troubleshooting
233