Sony Ipela PCS-XG80S Operating Instructions Manual page 197

To call remote parties not registered in the Phone Book
Basic operations are the same as those for a point-to-point connection.
For details, see "Calling a Remote Party Not Registered in the Phone Book"
on page 114.
1
Select "Detailed Dial" in the Home menu or press the CONNECT (
button on the Remote Commander to open the Detailed Dial menu.
2
Select "Number of Connected Sites" and select the number of the points to
which you want to connect.
The "Dial to:" text boxes that correspond to the selected number of points
appear.
Detailed Dial
Home
Phone Book
History
3
Set up the line interface of the remote parties in the "Dial to:" text boxes.
Select the line interface from the drop-down list on the left, and enter the
number of a remote party in the text box.
For LAN connection: Select "IP" from the drop-down list (when using the
For ISDN connection: Select "ISDN" from the drop-down list, and enter
the line number.
For ISDN (Telephone) connection: Select "TEL" from the drop-down
list, and enter the telephone number (ex. : 0390123456).
Enter all the parties with which you want to make a multipoint connection.
Detailed Dial
Home
Phone Book
History
For details on the setup, see "Calling a Remote Party Not Registered in the
Phone Book" on page 114.
IP
Dial to:
IP
Dial to:
IP
Dial to:
1 connector), and enter the IP address.
IP 123.123.123.1
Dial to:
IP 123.123.123.2
Dial to:
IP 123.123.123.3
Dial to:
Number of Connected Sites 3
Line I/F IP
Communication Bit Rate
2Mbps
Number of Lines 1B(64K)
Cancel
Number of Connected Sites
3
Line I/F IP
Communication Bit Rate 2Mbps
Number of Lines 1B(64K)
Cancel
Starting a Multipoint Connection
)
197