Configuring Multipoint; Setting Up Multipoint; Registering The Remote Parties In The Multipoint Connection List - Sony Ipela PCS-XG80S Operating Instructions Manual

Configuring Multipoint

Setting Up Multipoint

1
Open the Multipoint setup menu, set "Multipoint Mode" to "AUTO", and
make the necessarysettings.
Setup
For details on "Broadcast Mode" and "Split", see "Using the Display
Control" on page 200.
2
Open the Communication setup menu and make the necessary settings.
Setup
For details, see "Communication Setup Menu" on page 66.

Registering the Remote Parties in the Multipoint Connection List

You can register a multipoint connection list that includes all remote parties for
a multipoint connection in the Phone Book. It allows you to dial all the parties
simultaneously.
You can enter new remote parties to register in the multipoint connection list
or add the parties registered in the Phone Book to the multipoint connection
list.
Multipoint
Multipoint Multipoint Mode
Broadcast Mode
Split
Communication IP
Communication1 Individual Settings for Transmission/Reception
Individual Settings for Point-to-Point/Multipoint
AUTO
Split
Automatic
Save Cancel
Off
Off
Save Cancel
Configuring Multipoint
191