Step 1 Preparing The Power Supply; Installing The Battery Pack - Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual

Step 1 Preparing the
power supply

Installing the battery pack

(1) Lift up the viewfinder.
(2) Slide the battery pack down until it clicks.
To remove the battery pack
(1) Lift up the viewfinder.
(2) Slide the battery pack out in the direction of
the arrow while pressing BATT (battery)
release lever down.
If you install the large-capacity battery pack
If you install the NP-FM70/QM71/FM90/
QM91/FM91 battery pack on your camcorder,
extend its viewfinder.
(1)
(2)
1
2
(1)
(2)
BATT (battery)
release lever/
17