Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual page 45

Playing back a tape
About date/time and various settings
Your camcorder automatically records not only
pictures on the tape but also the recording data
(date/time or various settings when recorded)
(Data code).
Use the Remote Commander for this operation.
1 Set the POWER switch to PLAYER, then
playback a tape.
2 Press DATA CODE on the Remote
Commander.
The display changes as follows:
date/time t various settings (SteadyShot,
exposure, white balance, gain, shutter speed,
aperture value) t no indicator
4 7 2002
12:05:56
[a] Time code/Tape counter
[b] SteadyShot off
[c] Exposure mode
[d] White balance
[e] Gain
[f] Shutter speed
[g] Aperture value
To not display various settings
Set DATA CODE to DATE in the menu settings
(p. 127).
The display changes as follows when you press
DATA CODE on the Remote Commander:
date/time y no indicator
Date/time/
50
0:00:23:01
min
1
2
t
t
Various settings/
50
0:00:23:01
min
AUTO
50 AWB
F1.6 9dB
[a]
[b]
[c]
[d]
[e]
[f]
[g]
y
[a]
[b]
[c]
[d]
[e]
[f]
[g]
45