Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual page 199

Viewing images recorded on
"Memory Stick"s on your
computer
Viewing images on Macintosh
QuickTime 3.0 or newer must be installed to play
back moving pictures in Macintosh environment.
(1) Turn on your computer and allow Mac OS to
load.
(2) Insert a "Memory Stick" into your camcorder,
and connect the AC power adaptor to your
camcorder and then to a wall socket.
(3) Set the POWER switch to MEMORY.
(4) Connect one end of the USB cable to the
(USB) jack on the camcorder and the other
end to the USB connector on your computer.
USB MODE appears on the screen of your
camcorder.
(5) Double click the newly recognized icon on the
desktop.
The folders inside the "Memory Stick" are
displayed.
(6) Select and double-click the desired image file
from the folder.
Desired file type/
Still image/
Moving picture*/
* Copying a file to the hard disk of your
computer before viewing it is recommended. If
you play back the file directly from the
"Memory Stick," the image and sound may
break off.
(1)
(2)
(3)
(4)
(5)
(6)
Double-click in this order/
"Dcim" folder t "100msdcf" folder t
t
"Mssony" folder t "Moml0001" folder t
t
Image file/
t
Image file*/
t
199