Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual page 98

Dubbing only desired scenes
– Digital program editing
(on tapes)
Before operating the Digital program
editing function on tapes recorded
other equipment
Step 1 Connecting the VCR (p. 98).
Step 2 Setting the VCR for operation (p. 99, 105).
Step 3 Adjusting the synchronization of the
VCR (p. 107).
When you dub using the same VCR again, you
can skip steps 2 and 3.
Using the Digital program editing
function on tapes recorded other
equipment
Operation 1 Making a programme (p. 109).
Operation 2 Performing the programme
(Dubbing a tape) (p. 112).
Notes
•The Digital program editing works only for
tapes recorded in the Digital8
•When you connect with an i.LINK cable (DV
connecting cable), you may not be able to
operate the dubbing function correctly,
depending on the VCR. Set CONTROL to IR in
the menu settings of your camcorder.
•When editing digital video, the operation
signals cannot be sent with LANC
Step 1: Connecting the VCR
You can connect both an A/V connecting cable
and an i.LINK cable (DV connecting cable).
When you use the A/V connecting cable, connect
the devices as illustrated in page 93. When you
use an i.LINK cable (DV connecting cable),
connect the devices as illustrated on page 95.
If you connect using an i.LINK cable (DV
connecting cable)
With a digital-to-digital connection, video and
audio signals are transmitted in digital format for
high-quality editing.
98
system.
•
•
.
•
1
2
3
1
2