Table of Contents
Advertisement
Operation
Lifting and Carrying
If you do not have a ramp, we recommend that you lift
the machine at all times with two people in and out of a
vehicle.
Put the firmly locked handle into a lowered position.
Make sure that the machine base rests on a pad, so
that the Velcro surface of the driver plate does not get
damaged or hooked onto a carpeted surface.
Grip the machine from each side as shown.
When lifting the machine in or out of the vehicle, set the
wheels down first and then the machine base.
Make sure not to grip too close to the machine base. If
the base should flip upwards it can cause serious hand
injuries.
Veillez à ne pas serrer trop près de la base de l'appa-
reil, car si la base se retournait vers le haut, cela
pourrait causer des graves blessures à la main.
Make sure you lift the machine with a back-friendly
posture.
To save space, remove the star-shaped screw caps
and fold down the handle and place the frame in an
upright position.
To eliminate the machine from rolling or sliding during
transport, lower the frame as far down as possible until
it touches the wheels. The frame acts as a brake,
preventing uncontrolled movements. This form of trans-
portation requires sufficient space in a vehicle.
20
86375030 Manual
Advertisement
Table of Contents
