Displaying And Opening Mark In Points - Sony SR-R4 Operation Manual

DATE: Displays the files in date order.
NAME: Displays the files in file name order.
DURATION: Displays the files in recording
time order.
Selections marked with an asterisk (*) indicate
reverse order.
To change the signal format of the
system according to the file playback
format
To properly play back files that cannot be played
in the current system format (i.e., files displayed
in gray or files for which the converted playback
icon appear), the system settings must be changed
according to the files.
You can quickly change the system settings as
follows.
1
Select the file, and press the SELECT/
ENTER dial while holding down the
STOP button.
The SYSTEM Setup menu opens with the
state of each item matching the format of the
file.
Note
If you selected a file for which playback is not
supported on this unit, the menu will not open.
2
Verify the format that will be set, and
select and confirm "OK."
The format is changed.
Displaying and Opening MARK IN
Points
You can view MARK IN points and open them
from the File list window.
To display MARK IN points
1
Open the File list window.
2
Turn the ADJUST knob while holding
down the FUNC button to move to the
"Mark In Point" display.
F i l e l i s t
[ M a r k I n P o i n t ]
--:--:--:--
--:--:--:--
00:00:00:10 00:00:01:19
00:00:04:20
00:00:07:06
--:--:--:--
00:00:01:07 00:00:01:23
Name: F I L E 0 0 0 0 0 0 0 5
Date: 23 Apr 2012
Start TC: 00:00:05:12
Duration: 00:00:03:22
Format: 23PsF 1920x1080 444
SR-SQ 10bit
Folder Name: F I L E 0 0 0 0 0 0 0 5
SR-R4:CAM S T O P
Notes
• In the "Mark In Point" display, use the ADJUST knob
to move up and down through files, and the SELECT/
ENTER dial to move left and right through MARK IN
points.
• The MARK IN points will be displayed in the order in
which they were set. If three points are set in a single
file, the oldest points will be deleted when subsequent
points are set.
To open a MARK IN point
1
Turn the ADJUST knob to select the
corresponding file.
2
Turn the SELECT/ENTER dial to
select the MARK IN point, and press
the SELECT/ENTER dial to confirm.
The MARK IN point opens.
To delete MARK IN points
1
Turn the ADJUST knob to select the
corresponding file.
2
Turn the SELECT/ENTER dial to
select the MARK IN point, and press
the SELECT/ENTER dial while
holding down the FUNC button.
3
Select and confirm "OK" in the
confirmation screen.
Tip
You can also delete MARK IN points during
recording or playback.
[4/8]
00:00:02:16
14:35:57:27
0 0 :0 0 : 0 0 :0 0
TCG
FILE LIST Operations
41