Playback; Jog Mode; Shuttle Mode; Standby Off Mode - Sony SR-R4 Operation Manual

Playback

1
Insert the SRMemory card to play
back.
For details, see "To insert the SRMemory card"
(page 22).
2
Press the PLAY button.
Playback starts and the PLAY LOCK
indication lights up.
Note
If the DIAGNOSIS indicator on the F65 is a color
other than green, do not perform recording or
playback.
3
Press the STOP button when you want
to stop playback.
To play back files contiuously
Display the SYSTEM Setup menu, and set PB
FUNCTION >PB CONTINUE to "LIST."
The files will be played in order according to the
FILE LIST >SORT setting of the SYSTEM Setup
menu.

Jog Mode

Performs variable speed playback according to
the speed at which the ADJUST knob is turned.
1
Press the PAUSE button in the HOME
screen during playback to enter the
PLAY PAUSE state.
You can also perform this during shuttle
playback.
2
Turn the ADJUST knob.
Jog playback is performed according to the
speed at which the knob is turned.

Shuttle Mode

Performs variable speed playback according to
the position of the ADJUST knob and the speed at
which it is turned.
1
Press the PAUSE button during
playback to enter the PLAY PAUSE
state.
34
Playback Preparations and Operations
You can also perform this during jog
playback.
2
Turn the ADJUST knob while pressing
the FUNC button.
Shuttle playback is performed according to
the position of the knob and the speed at
which it is turned.
The playback state will remain in shuttle
mode even if you release the FUNC button
and the ADJUST knob.

Standby Off Mode

During the REC PAUSE or STOP state, if you
press the STOP button while holding down the
FUNC button or if the duration specified with the
SYSTEM >POWER >STBY OFF setting
elapses, the unit will enter Standby Off mode.
(Under the "Disable" default setting, the unit does
not enter Standby Off mode.)
The status indication will change as follows when
the unit enters Standby Off mode: "REC PAUSE"
t "REC PAUSE*" or "STOP" t "STBY OFF"
During Standby Off mode, the files on the
SRMemory card will be closed, the SRMemory
card will be unmounted, and the unit will
consume less power.
• By pressing the REC button during the REC
PAUSE* state, you can exit the power saving
mode and enter the REC PAUSE state. In
addition, you can press the PAUSE button to
enable mounting and recording start.
• By pressing the STOP button during the STBY
OFF state, you can perform mounting again and
enter the STOP state.
• The lid lock function will be released in
Standby Off mode, as less power is consumed
in this mode. If you eject an SRMemory card in
the REC PAUSE* or STBY OFF state, the unit
will switch to the STOP state.
Note
As starting recording or playback from Standby Off
mode requires a mounting operation, there will be a
delay before the operation starts. Before starting
recording or playback, perform Standby On operations
as necessary.