Sony SR-R4 Operation Manual page 36

Button
F FWD button and indicator
(NEXT)
PAUSE button and indicator
1) E-E mode:
The state in which E-E signals can be monitored. This mode is used to, for example, check the input signal
before recording.
2) E-E (electric to electric) signal:
A signal which passes solely through internal circuitry, and not through pathways in which SRMemory card
takes place.
3) To perform precise search direction or search speed operations, use shuttle mode. (see page 34)
36
How to Use the Recording and Playback Operation Buttons
Function when pressed alone
Moves to the beginning of the next
file.
Tip
The SYSTEM Setup menu >PB
FUNCTION >NEXT/PREV setting
determines whether MARK IN points
are included in this function. (see
page 58)
Pauses recording/playback. (The
indicator flashes during pause.)
Pressing this button again resumes
recording/playback.
Function when pressed with FUNC
button
Executes a forward direction search.
With each press, the search speed
changes in the order of x2 t x5 t x8
t x16 t x32 t x2 ...
If a search is interrupted by another
operation, the next search is performed
at the speed in effect at the time of the
interruption.
Cues up to IN points if IN points are
set. If an active MARK IN point is set,
opens the MARK IN point. (see
page 37)