Sony SR-R4 Operation Manual page 53

Setting Item
OTHERS TC OUT
Other settings related
to the main time code
RT REC
RT SET
RT SRC
TC Delay
Settings
Selects the time code to output from the TC OUT
connector.
AUTO [Auto]: During playback, the time code read by
the internal time code reader. During recording or when
in E-E mode, the time code generated by the time code
generator.
TCG [TCG]: The time code generated by the time code
generator.
THRU [Through]: Outputs the time code input to the TC
IN connector as is.
Specifies whether to record the current time to the user
bits (see page 30).
OFF [Off]: Does not record the time.
VITC[VITC UB]: Records the time to VITC user bits.
V+L[VITCUB+LTC UB]: Records the time to both VITC
and LTC user bits.
LTC[LTC UB]: Records the time to LTC user bits.
Sets the current time.
Selects the method in which the current time is recorded
to the user bits.
RTC [RTC]: Records the current time configured in the
RT REC and RT SET settings. (Select this under
normal circumstances.)
DATE [DATE]: Records the current time of the unit's
internal clock (i.e., the time displayed on the control
panel and the status indication). Continuity for frames
is not guaranteed with this method.
Sets the phase difference between the LTC input from the
TC IN connector and the time code generator.
0 [NO Delay]: Same timing
+1F [+1F Delay]: The generator is delayed by one frame.
+2F [+2F Delay]: The generator is delayed by two frames.
+3F [+3F Delay]: The generator is delayed by three
frames.
+4F [+4F Delay]: The generator is delayed by four
frames.
+5F [+5F Delay]: The generator is delayed by five frames.
53
TC Setup Menu