Table of Contents
Advertisement
Right- -hand vertical lift rod adjustment
(on- -board adjustment) - - Fig. 36
The right--hand vertical lift rod (2) can be adjusted
using knob (1) fig. 36 which can also be operated
from the driving seat.
WARNING
When extending the length of the right hand lift rod
do not increase length beyond the MAX mark.
The weight of the implement could forcibly pull the
sleeve (2) fig. 36 from the rod.
The length limit is shown by the MAX mark that
corresponds with the maximum extension point on
the rod.
For light work - - Fig. 37
When operating the tractor in draft or mixed control,
install the lower links (5) figs. 26 and 27 with the
spacers (1) fig. 37 fitted to the inner face of the lower
links. This will provide greater lift sensitivity when
working with light equipment or light draft loads.
For normal and heavy work - - Fig. 38
When operating the tractor in draft or mixed control,
fit the spacers (1) fig. 38 to the outer face of the lower
links for normal or heavy work.
This position, which reduces lift sensitivity, is
recommended for medium to heavy implements or
draft loads.
The figures illustrate the most suitable positions for
the above operations.
3--28
SECTION 3 - - FIELD OPERATIONS
LOWER LINK ATTACHMENT
MAX
24252
24253
36
37
38
Advertisement
Table of Contents
