PROBLEM
The engine will not start or is
difficult to start.
The engine does not run
properly and/or cuts out.
Engine does not reach
maximum power.
5--2
SECTION 5 - - FAULT FINDING
ENGINE
POSSIBLE CAUSE
Incorrect starting procedure.
Fuel level low or empty.
Air in fuel system.
Engine oil viscosity not right.
Fuel not suitable for ambient
temperature.
Fuel system contaminated.
Fuel filter clogged.
Fuel injector fault.
Fuel system contaminated.
Fuel injector fault.
Engine overload.
Air filter clogged.
Incorrect fuel type.
Low engine operating tempera-
ture.
Fuel injector fault.
Implement incorrectly set.
SOLUTION
See starting procedure.
Check fuel level.
Bleed fuel system.
Use oil of right viscosity.
Use correct type of fuel for
temperature conditions.
Clean system.
Replace filter element.
Contact your dealer.
Clean system.
Contact your dealer.
Change to lower gear or
reduce load.
Carry out maintenance on air
filter.
Use the right fuel.
Check thermostat.
Have your dealer check the
injectors.
See equipment manual.