Table of Contents
Advertisement
OPERATION 30
HYDRAULIC LIFT OIL FILTER - - Fig. 38
Unscrew and remove the filter (1). Oil the rubber seal
then screw on and tighten the cartridge
by hand. Top up the oil with fresh oil. (see operation.
no.35 page 4--21 ).
OPERATION 31
ENGINE OIL FILTER - - Fig. 39
Unscrew and remove the filter (1). Oil the rubber seal
then screw on and tighten the cartridge
by hand. Top up the oil with fresh oil. (see operation
no. 9 fig. 12 and 13).
OPERATION 32
HYDROSTATIC STEERING - - Fig. 40
Remove the filter (1) (press downwards and move
sideways) and wash the filter, together with the filler
cap in mineral oil.
NOTE: For oil grades, see the lubrication charts
beginning on pages 4- -41.
4--20
SECTION 4 - - LUBRICATION AND MAINTENANCE
3
/
of a turn
4
3
/
of a turn
4
1
TRE0841A
23759
38
39
40
Advertisement
Table of Contents
