Heat & Glo RED40-N-AU Owner's Manual page 25

Fire Risk. Explosion Risk.
Do NOT pack insulation or other combustibles between ceiling fi restops.
• ALWAYS maintain specifi ed clearances around venting and fi restop systems.
• Install wall shield and ceiling fi restops as specifi ed.
Failure to keep insulation or other material away from vent pipe may cause fi re.
Top Vent - Horizontal Termination
Venting with 1 elbow
V Minimum
1
1 ft. 305 mm
2 ft. 610 mm
3 ft. 914 mm
4 ft. 1219 mm 12 ft.
5 ft. 1524 mm 15 ft.
6 ft. 1829 mm 18 ft.
7 ft. 2134 mm 21 ft.
8 ft. 2438 mm 24 ft.
V + H = 63 ft. (19.2 m) Maximum
1 1
Figure 7.4
H Maximum
1
2 ft. 610 mm
6 ft. 1829 mm
9 ft. 2743 mm
3658 mm
4572 mm
5486 mm
6401 mm
7315 mm
Heat & Glo • RED40-N-AU, RED40ST-N-AU • 2294-900 Rev. G • 7/14
WARNING
Note: 12 in. (305 mm) minimum verti-
cal is required prior to attaching any
elbow to the appliance.
H
1
Note: Use DVP Series
components only.
V
1
25