Device With Touch Screen; Recalibrating The Touch Screen - Siemens SIMATIC HMI IPC477C Comapct Operating Instructions

Compact Operating Instructions
1.9 Commissioning
1.9.7

Device with touch screen

1.9.7.1

Recalibrating the Touch Screen

If the touch screen does not react as expected when touched, repeat the calibration.
Procedure for standard calibration
1. Select "Start > Programs > UPDD > Settings".
2. Select the controller
3. Click the "Calibration" tab
4. Select the "Number of points" option with the "25 point calibration"
5. Click "Calibrate"
6. Quickly touch the corresponding selections one after the other.
7. Confirm all input prompts (arrows, or crosses in the center) until the complete screen has
8. Finally, confirm the prompt with "Confirm".
30
The "UPDD Console" dialog box opens.
Figure 1-8 Point calibration
①
④
.
The calibration mask is output on the selected display.
The entry is confirmed by a check mark, the next selection is displayed.
been calibrated.
you wish to calibrate.
②
.
Compact Operating Instructions, 10/2010, A5E02368072-02
③
.
SIMATIC HMI IPC477C / HMI IPC477C PRO